Replacement Universal 6’ CPAP/BiPAP Tubing for use with nearly all CPAP machines.
The ClimateLineAir™ heated tube combines with the HumidAir™ heated humidifier built into AirSense™ 10 therapy devices to deliver an optimal temperature and humidity level.
This slim 15-MM Heated Tubing from Philips Respironics is designed exclusively for use with DreamStation CPAP & BiPAP devices equipped with a Heated Humidifier.
Special 4 foot lightweight, thin pressure delivery tube for use with the Z1 & Z2 device.
Replacement Universal 8’ CPAP/BiPAP Tubing for use with nearly all CPAP machines. Latex-free, BPA-free, Non-heated, Low memory to avoid kinks
Universal 6ft tubing can be used with any PAP machine.
The AirMini™ N20 setup pack connects your AirMini to a ResMed N20 CPAP nasal mask. It includes an N20 mask connector, tubing and waterless humidification - HumidX™ for average conditions and HumidX™ Plus for dry conditions, including aircraft cabins. Mask is not included.
Special 6 foot lightweight, thin pressure delivery tube for use with the Z1 & Z2 device.
Replacement Universal 10’ CPAP/BiPAP Tubing for use with nearly all CPAP machines.
The AirMini™ F20/F30 setup pack connects your ResMed AirMini™ CPAP to an F20 full face mask. It includes an F20 mask connector and tubing. Mask is not included.
Replacement Universal Slim 6’ CPAP/BiPAP Tubing. Latex-free, Non-heated, Low memory to avoid kinks
HDM Custom Tube Adaptor is a replacement adapter that is used with the HDM Z1 & Z2 CPAP system. It adapts a standard 22mm CPAP hose to the outlet on the Z1 & Z2
The DreamStation Go Micro-Flex 12mm tubing is the smallest and lightest tubing developed by Philips.
A 6’ heated tubing compatible with the ResMed S9 series PAP machines. Reduces humidifier rainout and increases effectiveness of heated humidification system.
This is a universal CPAP tubing adapter for the Transcend CPAP machines. This adapter allows you to hook the CPAP tube or hose to the Transcend machine.
The ResMed ClimateLineAir™ Oxy tube for AirSense 10 includes a smart connector at the foot of the tube, which allows supplemental oxygen to be completely mixed with warm humidified air before it reaches the mask.
This lightweight, flexible CPAP Tube is designed specifically for the AirMini Portable CPAP Machine and is compatible with the AirFit P10, AirFit N20, AirFit F20 and AirTouch F20 CPAP Masks.
Oxygen Supply Tubing. Connect your Oxygen unit to your PAP unit with this 25ft. Supply Tubing.
Oxygen supply tubing (15ft) to connect your oxygen unit to your CPAP device.
6’ SlimLine tubing compatible with the ResMed S9™ series PAP machines. Smaller diameter tubing than normal PAP hoses.